| Steps to applying your decal/vinyl lettering 1. Clean and dry the surface you will be applying your vinyl to. If you are applying it to a car window, we do not recommend that you adhere it in the path of a windshield wiper. Decals can damage paint, so we suggest you do not apply it directly to your car paint. 2. Lay your decal down top side facing you, and using a squeegee* press firmly across the decal, to ensure the vinyl is adhered to the transparent transfer tape. 3. Flip your decal over, so that the paper layer is facing up. Slowly peel the paper backing away from the decal. If any of the vinyl stays on the paper, lay the paper back down and repeat step #2. 4. Once you have removed the paper backing, lay your decal down on your surface in the desired location. Once you have laid it down, you will not be able to move it without damaging the decal. Slowly remove the transfer tape, and you are completed! Any questions? Feel free to email Kerry at: kerry@kiwiandkiki.com Enjoy! *If you do not have a squeegee available, we recommend you use a rubber spatula, or plastic card. |